How To Install Net Doors On Polaris Ranger

How To Install Net Doors On Polaris Ranger

If you are looking to install net doors on your Polaris Ranger, you have come to the right place! This guide will show you how to do it easily and quickly.

RANGER XP® 900 Door Install | Polaris Off-Road Vehicles

Tools You Will Need

  • Drill
  • 1/2″ bit
  • 1″ hole saw
  • Polaris Ranger
  • Plywood
  • Tape measure
  • Ruler
  • Circular saw
  • Cordless drill
  • 1″ hole saw
  • 1″ drill bit
  • Jigsaw
  • Sandpaper
  • Stiles
  • Latch
  • Knob
  • Screws
  • Hinges
  • Nails
  • Paint or a sealant
  • Latch
  • Door

    1. Read and understand the owner’s manual for your Polaris Ranger before beginning. There are specific steps you will need to take in order to install your nets.

    2. Drill a 1/2″ hole at the top of the door frame.

    3. Saw a 1″ hole in the door frame.

    4. Saw a 1″ hole in the plywood.

    5. Measure and mark the positions of the Stiles on the door frame.

    6. Measure and mark the positions of the Latch on the door frame.

    7. Drill holes for the screws in the Stiles and Latch.

    8. Fit the Latch into the drilled holes and screw it in place.

    9. Fit the Stiles into the holes in the door frame and screw them in place.

    10. Fit the Plywood over the top of the door frame and

Step Remove the old door

  1. Remove the old door by unscrewing the screws that hold it in place.

    2. Pry off the old door trim by using a flat head screwdriver.

    3. Remove the old door panel.

    4. Install the new door by screwing it in place and reinstalling the panel.

    5. Replace the old door trim.

    6. Replace the old door panel.

Step Affix the new door

There are a few different ways to affix the new door. One option is to use screws. Drive screws through the lip of the old door and into the framing of the new door. Make sure the screws are tight enough so that the door doesn’t move, but not so tight that they damage the framing.

Another option is to use lag screws. Lag screws have a wider head than screws and are designed to attach two pieces of wood together. Drive lag screws through the lip of the old door and into the framing of the new door. Make sure the screws are tight enough so that the door doesn’t move, but not so tight that they damage the framing.

If you want to use wall brackets, you’ll need to purchase them separately. Wall brackets attach to the exterior of the house and support the new door.

Step Secure the new door

There are a few simple steps you need to take to ensure your new door is a success.

The first step is to secure the new door. This can be done by bolting it to the frame of your vehicle or by using a strap system. This ensures that the door is stable and won’t move during heavy use.

The next step is to install the door hinges. This will allow the door to open and close freely. The hinges should be installed at the bottom of the door, near the ground. This will prevent the door from hitting objects while in use.

The final step is to install the door handle. This will allow you to open and close the door without having to use your hands. The handle should be installed at the top of the door, above the hinges.

Step Test the new door

  1. When you receive your new Polaris Ranger door, it is important to test it before installation. Open and close the door a few times, and make sure it is sturdy and does not wobble.

    2. If the door is still not sturdy or does not stay closed, you may need to install the door frame reinforcement kit. This can be found at most hardware stores. Simply follow the instructions that come with the kit.

    3. Next, you will need to install the door hinges. Look for hinges that are compatible with your door. The hinge should have a U-shaped bracket. The bracket needs to be installed on the inside of the door, and the hinge needs to be attached to the bracket.

    4. The last step is to install the door handle. The handle should be attached to the door with a screw. Make sure the screw is tight, and make sure the handle is facing the right direction.

Tips for Maintaining Your Net Door

  1. Regularly check for wear and tear on the net door. A net door that is not properly maintained can become loose, opening and shutting erratically. This can lead to a dangerous flying object hazard.

    2. Inspect the net door for any signs of damage. Broken or missing bolts, welds or screws can lead to the net door becoming unsafe to operate.

    3. If there is damage, replace the net door as soon as possible. This will ensure the safety of you and your passengers.

    4. Clean and lubricate the net door as needed. Over time, the net door can become clogged with dirt, dust and grime. This can cause the net door to become difficult to operate and potentially dangerous.

    5. Check the net door for proper fitment. Make sure the net door is properly installed on the Polaris Ranger and not too tight or too loose. This can cause the net door to become difficult to operate and potentially dangerous.

Conclusion

Installing net doors on a Polaris Ranger is a simple process that can add extra security and protection to your vehicle.

See also  How To Disable Door Chime On Ford F250

Related Posts

Leave a Reply

Your email address will not be published.